RM-5 Ribbon Mic Full DIY Kit with Assembled Motor
RM-5 DIY Ribbon Mic with Shock Mount
RM-5 DIY Ribbon Mic Output XLR
RM-5 DIY Ribbon Mic Bottom Cap
RM-5 DIY Ribbon Mic Top Cap

RM-5 Ribbon Microphone Full DIY Kit with Assembled Motor

199.00 excl. VAT

A premium quality ribbon microphone that you can build yourself. Very simple assembly process and beginner-friendly illustrated assembly manual.

4.84 out of 5
(19)
    • 0 €
    • 19 €
    • 29 €
    • 4.95 €
    • 59 €
 

Pre-Assembled Ribbon Motor

The mic motor comes pre-assembled and tuned by our experienced assembly technician, so the most complicated work that requires specialized equipment for proper results is already done for you.

Original Toroidal Transformer

The toroidal transformer is our own original design, made to couple perfectly with our ribbon motors. The main advantages of a toroidal design are the immunity to EMI and very low winding resistances.

Make Your Own Premium Quality DIY Ribbon Microphone!

In spite of being one of the oldest technologies in microphone industry, ribbons are still one of the most lightweight membranes on market. Small mass means fast reaction and response to every smallest change in audio field around the transducer. As a result, You get perfect transient response which is the key to a secret of an outstanding presence effect that ribbon microphones are well known for.

Ribbons are claimed to be the most naturally sounding microphone transducer type and it is difficult to disagree once You have heart a good one in action. It can be described best as “You are there” feel. They are very smooth, flat and even sounding by their nature, so the major goal of a designer is not to spoil this natural beauty with usually unneeded sophistication.

The beautiful simplicity is one of the main advantages of ribbon microphones as every electronic component adds a little bit of overall distortion and artifacts to a source signal, so as less of them You have in Your audio path as closer is resulting signal to an authentic acoustical source – it feels as an acoustic guitarist sits in front of You and picks the strings of his instrument, You can feel the touch of a plectrum when listening to electric recordings, You can almost see emotions and face expression of a tracked vocalist…

Overview

The RM-5 Ribbon Mic Kit features precision machined and individually hand-tuned ribbon motor with a 2″ long ribbon made of highest quality Japanese 2.5 micron thick aluminum foil and high-grade NdFeB magnets.
The motor comes assembled!

The toroidal transformer of our own design makes a perfect match with the motor revealing the great presence effect and preserving the clarity of sound.

Bodies are individually machined by a local company from hand selected stainless steel tubing of finest grades with attention to the details and mechanically matte-polished for our signature appearance. Our own original XLR receptacle is CNC carved right in the bottom cap and male XLR insert with gold-plated pins is included.

What exactly is included?

Everything you need to make a classy modern ribbon microphone:

  • RE-254 Ribbon Mic Motor
  • RTP-35 Toroidal Output Transformer
  • Matt-polished stainless steel body with all the hardware – caps, screws, grill
  • XLR insert with gold-plated pins.
  • Illustrated Assembly Manual (online)

Check out the detailed assembly manual with every step well-described and clearly illustrated with photographs. Yes, this kit is easy enough to DIY for any person, even without any experience in electronics.

Technical Information

We provide some relevant info here, but our advice, as You might have guessed, is to make a decision based on studying our media, rather then reading plain numbers. Of course, any questions are very welcome and don’t hesitate – we are always happy to have a conversation about the audio!

  • Acoustic principle: pressure-gradient
  • Polar pattern: bi-directional / figure-eight
  • Circuit type: passive
  • Recommended load impedance: > 2000 Ohms
  • Frequency response: 35 – 14.000 Hz approx.
  • Output connector: 3-pin male XLR
  • Dimensions: D 1.10″ (28 mm), L 7.68″ (195 mm)

The shockmount is not included!

  1. 5 out of 5

    Since I bought a pair, I used them everytime. They are excellent on guitar and bass amp, overhead, toms, acoustic guitar, acoustic piano, drum room… The sound is warm and smooth, they are not aggressive.
    These microphones are really awesome and really cheap!
    Just fantastic 🙂
    http://www.loransaulus.com
    http://www.devenprod-studio.com
    http://www.pure-mastering.com

  2. 5 out of 5

    This mic is great.
    I used it my acoustic guitar: every subtlety is recorded with a fidelity I never thought I could get in my personal studio (I used it with a TLAudio VC-PA1). I also used it on drums, sound is thick and massive, it’s a cool tool for fast drums recording (I used it in front of the kit, with 2 small diaphragm mics as overheads). Finally I tried it on my electric guitar: the clean and lush sound of my Jazzmaster, through my Fender Silverface amp is just perfect: full, rich, and beautiful as the source sound itself. This mic beautifully takes comp and EQ, you really can shape the sound as if it was physical, not just data.

    Building the kit is rather easy but the transformer is fragile, I was afraid I damaged mine and even had to solder one of the wires. I emailed Artur Fisher, and I must say he responds really fast. He helped a lot and I know that if things had gone wrong he would have helped further. He’s a really nice guy.

  3. 5 out of 5

    The RM-5 ribbon is an excellent and relative inexpensive way to expand your microphone collection. I get great results when using this mic on drums and trumpet/trombone, that’s why I bought a second one!

  4. 5 out of 5

    Great sound, easy to build!
    Juerg.

  5. 5 out of 5

    This mic is so good that…. i bought second one! At this price – perfect! I use it on stage in front of Marshall 4×12 cabinet.

  6. 5 out of 5

    The RM-5 is one hell of a mic! I have tested it with electric guitar, acoustic guitar and vocals and the sound is fantastic, with great depth and beautiful mid range. During the electric guitar sessions I had it side by side with a Royer R-121 and I have to say that all three people present (two engineers and the artist) thought both mics are at the same level of sonic quality. I could not recommend this kit any more.
    Artur is the nicest guy and his customer service is second to none.
    Oh, also, I’m in California and received my kit in only two days!

  7. 5 out of 5

    Easy to build, excellent audio quality. The insulation tape on the trafo should be a little thinner to make it easier to slip into the body.

  8. 4 out of 5

    Superb sound quality, but I give 4 stars because all the mounting screws is a bit loose (to thin for the holes) and there is nothing to stop them from getting in the microphone.

  9. 5 out of 5

    I am very pleased with my purchase, the order has been shipped and received within about 4 days. The kit is very simple and easy to assemble and solder. About the sound, this is my first ribbon microphone, but I am very pleased with the end result. This will be my new go-to microphone for acoustic guitar recording. Highly recommended.

  10. 5 out of 5

    Great mic for drum overheads and guitar amps, rounds the top to a natural warmth… Those were the uses I tried! Really happy with my pair!

  11. 5 out of 5

    I can not comment on the performance of the mic yet, but delivery was super-fast and assembly very fast and easy, too. The housing is clean and looks very good (in my opinion). From what I have seen I expect a very long lifespan, there is nothing flimsy that looks like it’s going to break any time soon…
    Soon we will record another demo, I will put the mic through the paces and write about the sound qualities as well. If they are as good as the rest I expect to get another one.

  12. 5 out of 5

    Great microphone in a kit that is just ridiculous to assemble.
    If you can solder an XLR cable you can assemble this.
    If you can’t you can buy a few beers and invite a friend that can and do it together.
    It’s so good that this is my second pair.
    On first impression it may sound a little “dark” – but not dull at all – but do not fret, this mic (as most ribbon mics) can take HUGE amounts of high shelving (and other kinds of eq too) like a champ.
    Now excuse me, I have to put up the goggles and try one of these on snare.

  13. 4 out of 5

    Kit was easy to build.
    Haven’t had much opportunity to use it yet, but it sounded very good when tested on a guitar cab, and also on a banjo. I put a far more expensive ribbon mic up for comparison, and while it didn’t sound the same, the RM-5 performed quite well.
    It sounded like there was a little more bottom end (a plus for some uses), but also a little boost at about 800 Hz (not so helpful, but not too much of an issue).
    I am looking forward to using the RM-5 on some recordings in the future.

  14. 5 out of 5

    Love this mic. It’s now my main mic for guitars, just mix in a little 57 and D6 and you’ve got a great guitar sound. The kit was too easy to build. It took me about 15 minutes seriously.

  15. 5 out of 5

    This is an A+ business, and he treats his customers very well! The transaction was ridiculously easy, the shipping was extremely fast, and the mic components were all packaged well. After assembly, I found I had no output, so I emailed Artur immediately. His troubleshooting assistance was fast and clear. It turns out that there was an issue with the transformer. He immediately got a replacement shipped. I received the new component, threw it in the mic, and was on my way! Like I said, I haven’t been able to put it through it’s paces, but I can tell you that the output is clear, with no distortion, or additional audio artifacts. I expect when I get a chance to put it into action, it will not disappoint.

    Artur is quite a stand up guy. If you’re interested in DIY and looking for a ribbon mic, look no further. Grab one from Artur. Even grab a second one! I just did.

  16. 4 out of 5

    This is an awesome microphone for an awesome price!!! it is all that you read in the description, a sturdy enclosure, high grade ribbon and trafo…. I’ve been using it with electric guitar, voice and acoustic instruments with very good results! It’s really worth 5 stars, but i gave it 4 because the toroidal transformer comes with simple protective tape and while snugging the trafo into the enclosure, the xlr lead got loose and unrolled the tape…. otherwise this assembly is as easy as it gets 😉

  17. 5 out of 5

    I love my ribbon mic from Artur Fisher. I recorded a baritone five minutes after the mic arrived. I had been using a Microtech Geffel UM 70 on this singer. The ribbon was delicious! All the necessary clarity was there, but with a beautiful mid range and stellar bass. I used a cloud lifter to boost the signal.
    Next I used it as a distant mic on a female singer and blended it with a valve condensor mic. The ribbon gave her a space to sing in. Very subtle, and very nice.
    Today I will try acoustic guitar. I cannot wait to get one of Artur’s thinner foil ribbon miss. I expect the transient response on acoustic instruments will be amazing,
    Artur is a great guy who really looks after his customers. Highly recommended.

  18. 5 out of 5

    What a great mic!
    It’s a really solid, fat, dark, broad, smooth, but very detailed and natural sounding microphone.
    I tested the mic on trumpet, which sounded creamy and warm, also on acoustic guitar and clean/overdriven electric guitar. All sounded really great. The mic can easily take a lot of dB’s. I compared the mic with a Beyerdynamic M160, which has a more higher frequency sound and an Electro Voice RE20 on trumpet, which sounded a bit flat and grainy to me. This RM5 ribbon mic has a lot of space/depth in the sound, which I like very much. The sound can breath, without picking up much room.
    Building the mic was exciting, especially placing the transformer and soldering the motor, but all worked out pretty nice. The manual is very clear. When testing this ribbon, a big smile was the result – and a very nice professional sounding recording.

  19. 5 out of 5

    There was of course some anxiety upon reception of the parcel! The idea of building my own ribbon mike sounded as a real challenge!
    The kit is nicely and safely packed. Assembling the kit is very easy. The whole process took me about half an hour.
    The result is just fantastic! Great ribbon mike sound, accurate and dense, no noise, and the output level is fine, even when using only the preamp of my MOTU 4 Pre interface at about 75% of its power.
    I have tried recording my tenor sax on its own and an acoustic guitar and the results are great!
    I will continue using and testing the mike in the coming weeks and may purchase another one to make a pair.
    I definitely recommend Artur Fisher’s kit!

Add a review

Your email address will not be published. Required fields are marked *

SKU: ITM-RM-05 Category: Tags: ,

You may also like…

Updating…
  • No products in the cart.